中文版 English
 
 
Coating Thickness Gauge    Temperature & Humidity Measuring Gauge     Surface Cleanliness     Standard & Inspection Manual
Surface Profile Gauge     Adhesion Tester    Pinhole & Porosity Detection     Hardness Tester
Color / Gloss Meter    Steel Thickness Gauge    Gas Detector     Lab. Instrument
Gloss Meter
Product Infomation
Increasingly, specifications and standards require an assessment of gloss. Gloss measurement is necessary to monitor the uniformity, compatibility, or possibly the deterioration of any protective gloss finish.

The Elcometer Novo-Gloss? glossmeters are available in a Basic version - the Elcometer 401 - or a Statistics version - the Elcometer 402 - which has a memory of up to 999 readings and can be connected to the Elcometer Novo-Soft? Software for further analysis and archiving. Single, dual or triple geometry angle versions are available.

Auto-ranging from 0-1000 Gloss Units allows gloss readings over the entire range from non-reflective surfaces to mirror finish
Continuous measurements for variable surfaces
Calibration possible using any standard
Full traceability to BAM standards, certificate supplied with each gauge
Internal calculation of max, min, mean and coefficient of variation
Software and cable supplied with all statistics models

Elcometer 400 Novo-Curve? Glossmeter for Curved Surfaces
Product Infomation
Increasingly, specifications and standards require an assessment of gloss. Gloss measurement is necessary to monitor the uniformity, compatibility, or possibly the deterioration of any protective gloss finish.
Gloss Meter
Product Infomation
Origin
China
   
Model
20°60°85°
60°
L60°
Range
0-199.9GS
0-199.9GS
0-199.9GS
error
±1.5GS
±1.0GS
±1.0GS
Stability
0.4GS
0.4GS
0.4GS
Bore size
20°60°ф10mm
85° ф7mm
ф13mm
ф30mm
Size
140×32×64mm
114×32×64mm
150×43×76mm
Weight
420g
300g
480g
Only one No. 5 battery is needed
Colour Meter- Hand Held
Product Infomation
The Micromatch Plus combines the accuracy, power and
capabilities of a spectrophotometer with quick and simple
operation. This hand held, lightweight (500 grams including 4 x AA batteries) instrument may be used for quality control of paints and plastics on the production line, in the Q.C. department or at customer site meetings by technical support staff.
Features include short measurement time (0.3 seconds) with direct data transfer -10,000 measurement results (per battery set) can be stored and displayed in all common colour scales and indices including metamerism. Up to 200 standards and 999 colour samples may be stored in the memory. Calibration necessary at three month intervals only.
 
Product [ Blast Equipment | Vacuum Equipment | Spray Equipment | High Pressure Water Cleaner | Inspection Instrument | Weary Material | Color Card ]
www.freeland.org.cn
Print
Copyright © 2006  Shanghai Freeland International Trading Co. Ltd.
Add:  No.368-388 Henmianjiang Road,zhangjiang Pudong,Shanghai,China :201210P.R. China
Tel:021-50343622 50346344   Fax:021-38710119    E-mail:[email protected]
 
沪ICP备09011143号